I’ve just released a new version of norelite that includes some fixes to the code and I ran into some issues when doing “npm update” of my installed Node-RED modules and it might be of interest to others to know how I fixed it.
The issue was not related to norelite but to node-red-contrib-rfxcom that simply couldn’t compile email@example.com which is a dependency. After a lot of attempts and actually a re-install of nodejs, Node-RED and npm I finally found an instruction in the Node-RED docs related to Wheezy (I’m running Jessie though) that fixed the problem.
This was the error message that I received:
Failed to execute '/usr/bin/nodejs /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/home/pi/.node-red/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_path=/home/pi/.node-red/node_modules/serialport/build/Release' (1)
npm ERR! Linux 4.1.13-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/local/bin/npm" "install" "firstname.lastname@example.org"
npm ERR! node v4.4.7
npm ERR! npm v2.14.15
npm ERR! code ELIFECYCLE
npm ERR! email@example.com install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR! Failed at the firstname.lastname@example.org install script 'node-pre-gyp install --fallback-to-build'.
npm ERR! This is most likely a problem with the serialport package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-pre-gyp install --fallback-to-build
npm ERR! You can get their info via:
npm ERR! npm owner ls serialport
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/pi/.node-red/npm-debug.log
And I solved it as follows: I first installed email@example.com with unsafe-perm variable set and then node-red-contrib-rfxcom as follows (you could probably just use the variable with node-red-contrib-rfxcom)
sudo npm install --unsafe-perm firstname.lastname@example.org
sudo npm install node-red-contrib-rfxcom
To get a quick start with norelite I’ve made a short video that explains the core components and how to quickly design the flows required to implement 3 rules that will turn on/off a switch if:
- It is dark outside and it is before 23:00
- It is dark outside and I’m watching the TV – It might be that I’m watching the TV after 23:00 and I also want the lamp to be on 15 mins after I’ve turned off the TV
- It is dark outside and there is movement in the house – I.e. getting the input from a PIR detector and whenever it triggers and it is dark outside the lamp will turn on for 5 mins. E.g. if I wake up during the night and want to go and get a glass of water…
If any of the above rules are true, the lamp will be on and if not it will turn it off.
I’ve built my home automation system based on Node-Red (as mentioned in Flexible home automation system) and I am using 1-wire sensors for humidity, temperature and to measure the daylight level.
Initially I used the Node-Red “node-red-contrib-owfs” package to communicate with my 1-wire server but I have multiple 1-wire hubs and the package simply does not support having an hierarchy of sensors so I created a my own node to resolve this – noreowfs.
Use the UI of the 1-wire server to find the attribute that you want to read and simply add to the configuration of the node and the value will be available in the output of the node.
I have, for a number of years, tried a number of different home automation solutions but I’ve not been completely satisfied with any of them due to either lack of features, too difficult to oversee or too proprietary…For years I used SwitchKing and I’ve also tried Domoticz and looked into other options such as OpenHAB but I’ve been frustrated with either the UI, only running on Windows or too much and too complex.. So I decided to base my own Home Automation-setup on Node-Red instead as it very simple to use and extend if necessary and there is a vast amount of additional nodes one can use in your own setup.
However, Node-Red is, by default, a non-stateful event engine which means that if I was to implement my turning on/off lights rules it would have to include a large amount of message flows and I would have to be using complex custom coding to share information between the flows. E.g. I would like to implement the following rules:
- Turn on the light switch if:
- It is dark outside and the time of day < 23:00
- It is dark outside and the TV is on (i.e. even if the time is above 23:00)
- It is dark outside and there is movement in the house (e.g. someone wants to go to the bathroom during the night)
- Otherwise turn it off
To implement all of the above is quite complex if just using the standard nodes in Node-Red as it does not keep the state – e.g. turn off only if there is no valid rule. So I decided to implement e number of nodes to ease the process of defining these rules and to take action (turn off/on).
Example of a few rules and filters
I’ve been running it now for a number of months and I am happy with the result. It is simple to add new datasources/sensors and to create new rules and flows if necessary.
I’m running it on a Raspberry Pi 2 with a rfxtrx433 transceiver but can also be used with a Tellstick (but I haven’t tested it though)
Take a look at the demo: http://goo.gl/T6Ag9P
And if you want to try it out it is available in NPM for download: https://www.npmjs.com/package/norelite
I want to share a link that I stumbled upon when I was troubleshooting some print issues back when I was using Slic3r as a slicing tool that help me a lot with with my printer configurations: https://www.simplify3d.com/support/print-quality-troubleshooting/
Even if it is on the Simplyfy3D website the issues and and resolutions are applicable for any printer/software…
I’ve written a small little Greasemonkey snippet to be used with IBM Verse with the standalone IBM Sametime client. Install Tampermonkey for Chrome or Greasemonkey for Firefox/Safari and install the user script to get it running..
After you’ve installed the browser plugins simply click on the “RAW” button on the gist page to install the script.
I’ve just purchased a license for S3D and I’m starting to learn it/configure it for my Velleman k8200 printer. I’ve been running Slic3r previously and that slicing tool has a great integration to OctoPrint and I’ve not found anyone that has proposed a simple way to send the gcode output from S3D to OctoPrint so I’ve solved it fairly easily by simply issuing a curl command.
Go to Edit Process Settings and select the Scripts tab and enter the following statement
curl -H "X-Api-Key: 185A556C8F684E20AAB85F2D867F2791" -F "select=false" -F "print=false" -F "file=@[output_filepath]" "http://192.168.2.197/api/files/local"
- Change to your own API-key
- Modify the URL (and if you want to save it to your sdcard change the URL to …/api/files/sdcard)
- If you want the uploaded file to become selected upon upload change select=false to select=true
- If you want it to start printing upon upload change print=false to print=true